Mercury observations with Adaptive Optics [THEMIS Solar Telescope ]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Mercury observations with Adaptive Optics =====

Solar AO running at 150Hz on Mercury in daytime
<columns 100% 50%  50% >
<html> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
<video onloadedmetadata="this.muted = true" height="150" controls autoplay loop>
<source src="/wdata/A_Merc/Mercury_AO.mp4" type="video/mp4">
</video></html>
<newcolumn>
{{science:gallery:mercury:mercemission_2d_20211028_1_2_d1_na_co_v1.jpg?0x160|}}
</columns>

THEMIS has a long track of doing Mercury observations in daytime. It took some tuning to adjust a 1kHz AO system to less photons, longer exposure times, and a slower speed. But the **hardware and the software are strictly identical**, and changing the configuration takes just 2 minutes. Despite of the slower speed, the result is surprisingly good and gives excellent results in the long-exposure spectra. These data are use for sub-arcsecond mapping of the exospheric sodium emission of Mercury (sodium map emission courtesy Mangano & Leblanc).   
\\ \\
<columns 100% 40%  60% >
<html> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
<video onloadedmetadata="this.muted = true" height="150" controls autoplay loop>
<source src="/wdata/A_Merc/Merc_scanning_over_F2slit.mp4" type="video/mp4">
</video></html>
<newcolumn> 
Mercury is scanned across the spectrograph slit using our OBJ2 scanning mirror. Scanning is performed along  Mercury polar axis and acrosse its equator. Planet orientation is adjusted (if necessary), by setting an offset to the field rotator. 
</columns>